Alcove Kit

For standard top sizes: (Nominal + 3/4”) Two Alcove Kits, VMAKIT are used in place of side kits when installing the vanity into an alcove. Each Alcove Kit adds 3/8” (per side) to the overall nominal width of the vanity. The wall opening should be 7/8” larger to allow 1/16” gap on either side of the Alcove Kit. The image shows the dimensions for a 30" vanity as an example.

(Nominal + 3/4”) Two Alcove Kits, VMAKIT are used in place of side kits when installing multiple ganged vanities into an alcove. Each Alcove kit adds 3/8” (per side) to the overall nominal width of the ganged vanities. The image shows the dimensions for a ganging arrangement using two 24" and a 12" vanity as an example.

Two Alcove Kits, VMAKIT are used in place of side kits when installing the vanity into an alcove. Each Alcove Kit adds 3/8” (per side) to the overall nominal width of the vanity. Field installed extra filler to match the wall is added as shown in image. Note: this may also be done with multiple vanities.

One Alcove Kit, VMAKIT is used with a single side kit when installing the vanity into a corner. The Alcove kit adds 3/8” to the overall nominal width of the vanity. This shows the dimensions for a 24" and a 12" vanity ganged together with one Alcove kit as an example. Note: this may also be done with a single vanity.